Our delivery prices are fair and simple.
- Free for orders over £500
- £36 for orders under £500
- £15 for small orders under 18kg
Additional charges apply for Surcharge and Islands postcodes
Please provide your postcode above, to pick a date. |
---|
Additional charges apply for Surcharge and Islands postcodes
Call us on 0330 094 0304
Monday to Friday, 9am to 5pm, or email
help@porcelainsuperstore.co.uk
The Porcelain Superstore Promise
We've been delighting our customers for over 10 years with service to smile about!
This cementitious slurry primer is designed to provide an exceptional bond between your tiles and the bedding mortar underneath. It can be used with many materials, including 20mm porcelain, natural stone and concrete pavers.
It is suitable for commercial applications including pedestrians schemes, paths and drive/carriageways. It can take the weight of vehicles, depending on the tile.
✔ Simply mix with water
✔ Quick and easy to apply
✔ Specially formulated for porcelain
This priming slurry should be applied both to the sub-base, before the mortar course is laid, and the underside of the tiles. Before application, ensure the tiles are cleaned to remove dust and loose material.
Pour 7 litres of clean water into a bucket and slowly add all the primer powder. Mix for up to five minutes until a smooth and lump-free consistency is achieved.
Soak the sub-base with water then apply a layer of slurry primer, 1 - 2 mm thick, using a brush or roller. You can then proceed with the layer of bedding mortar. The underside of the tiles must also be primed before being laid onto mortar.
Any priming slurry on the face of your tiles should be wiped clean immediately.
This 20kg sack will cover 15 m2 of tiles at 1 - 2 mm thickness.
This cementitious slurry primer is designed to provide an exceptional bond between your tiles and the bedding mortar underneath. It can be used with many materials, including 20mm porcelain, natural stone and concrete pavers.
It is suitable for commercial applications including pedestrians schemes, paths and drive/carriageways. It can take the weight of vehicles, depending on the tile.
✔ Simply mix with water
✔ Quick and easy to apply
✔ Specially formulated for porcelain
This priming slurry should be applied both to the sub-base, before the mortar course is laid, and the underside of the tiles. Before application, ensure the tiles are cleaned to remove dust and loose material.
Pour 7 litres of clean water into a bucket and slowly add all the primer powder. Mix for up to five minutes until a smooth and lump-free consistency is achieved.
Soak the sub-base with water then apply a layer of slurry primer, 1 - 2 mm thick, using a brush or roller. You can then proceed with the layer of bedding mortar. The underside of the tiles must also be primed before being laid onto mortar.
Any priming slurry on the face of your tiles should be wiped clean immediately.
This 20kg sack will cover 15 m2 of tiles at 1 - 2 mm thickness.
Express Delivery is FREE on Orders Over £500
For orders under £500, delivery is just £36
Choose a Convenient Delivery Date
At the shopping cart you can pick a convenient weekday for your delivery.
Please Note
Most orders are delivered on a pallet and are kerbside only.
For smaller order that weigh less than 18kg, delivery is just £15
There may be a surcharge to certain postcodes.
Please see our deliveries page for more information.
Returns
We’re confident you’ll love our tiles as much as we do, but we offer a 100 day returns policy just to make sure. So if you’re not happy with your new tiles, you can return them to us for a full refund, up to 100 days after receiving your order.
Please note that we can only accept returns on your full order. We can’t accept returns on partial or leftover boxes of tiles. See our returns page for more information.
Our friendly team are here to help with all your tile questions.
You may also like ...
Get inspired: These tiles in real homes
In real homes
See how customers are using these tiles
Fitting Essentials
Loading App Layer