15% OFF: HOP24
Our Cement Backer Boards are the perfect material to tile onto, as they’re extremely strong and won’t rot, swell, or warp. They can be used to strengthen timber floors, helping to remove any bounce and reduce the chance of tiles cracking. They can also be used to overboard concrete floors and stud walls.
At just 6mm thick, they will provide the same rigidity as traditional 18mm plywood without the additional floor build up. And unlike wood, they are water resistant and won’t expand even when very wet.
✔ Made from fibre cement
✔ Superior strength
✔ Resistant to water
✔ Non combustible
✔ Quick and easy to install
✔ Safe for underfloor heating
✔ Low weight so easy to carry
Cement backer boards must be fixed to timber floors using the complimentary screws and adhesive. Run a bead of adhesive all around the board and a further two beads down the centre and fit in place, then secure each board with 15 screws. Run a bead of adhesive along each board edge before placing the next board, to reinforce and waterproof the joints.
Boards must be primed before tiling using Prime Plus. They can be cut either with a scoring knife or circular saw with PCD blade.
Each board will cover 0.72 m2
Express Delivery is FREE on Orders Over £500
For orders under £500, delivery is just £30
Choose a Convenient Delivery Date
At the shopping cart you can pick a convenient weekday for your delivery.
Please Note
Most orders are delivered on a pallet and are kerbside only.
For smaller order that weigh less than 18kg, delivery is just £15
There may be a surcharge to certain postcodes.
Please see our deliveries page for more information.
Returns
You can return your full order to us within 30 days for a complete refund.
Please see our returns page for more information.
Call us on 0330 094 0304 Monday to Friday, 9am to 5pm, or email help@porcelainsuperstore.co.uk